Wave – Wavy desk organizer for notes & cards

A little landscape for the papers that otherwise wander across your desk. Four wave-shaped dividers rise from a rounded base, creating three open channels for notes, cards and envelopes.

One piece. No assembly. No supports. Print it in one colour, as in the real photos, or try the included two-colour Bambu project.

On your desk

• 132 × 84 × 47 mm overall.

• Three channels with stepped heights, so papers are easy to see.

• Flat base and open sides; papers rest between the waves rather than being clamped.

The gallery shows an actual terracotta-coloured print, empty and holding papers. The saved two-colour project uses navy and sand instead; choose your own filament colours.

Download options

• Single-colour STL: the complete one-piece model, ready to slice for your own printer.

• Bambu Studio 3MF: H2S + AMS, 0.4 mm nozzle, two PLA colours.

• Creality Print 3MF: K2 Plus, 0.4 mm nozzle, single-colour PLA.

• Anycubic Slicer Next 3MF: Kobra S1, 0.4 mm nozzle, single-colour PLA.

• EN/CZ instructions and an editable source ZIP. The source ZIP keeps the working name DUNA v1.

Open each 3MF in its matching slicer as a complete project, check your actual filament and build plate, and re-slice before printing. The printer-specific projects were digitally checked; the photos do not certify every supplied printer profile.

Printing and use

Print with the flat base down. All supplied projects use 0.20 mm layers, 15% infill and no supports. The two-colour H2S project uses 3 walls and a prime tower; the single-colour K2 Plus and Kobra S1 projects use 2 walls with no prime tower.

Use on a level desk with lightweight papers. Open sides make loading easy, but there are no side stops or paper clamps. Avoid heavy bundles, check stability, and keep PLA away from high heat. Let the print cool before removing it from the plate.

Free download under CC BY-NC-SA 4.0.