PVC Leg adapters for Costco Greenmade Utility Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapters to allow for more flexibility in shelf height with the Greenmade shelving/rack unit
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
I am using the Greenmade shelving units for NFT channels/hydroponics and I needed more flexibility in shelf height. Designed these adapters to allow nearly infinite height adjustability.
Designed around using 1 1/2" standard schedule 40 PVC pipe for legs.
You can use the adapters and PVC pipe for the leg only, eliminating the stock/factory legs, or you can use the adapters with pipe and the factory legs to help manage costs.
If you use the adapters with a 1 1/2" length of pipe and the factory leg it nets a total height of ~20".
These adapters do not interfere with factory legs in shelves above or below them.
You can see various configurations in the pictures.
I printed in ABS on my Bambu X1C so these were designed around that material's shrinkage on my printer resulting in hand tight fitment. Definitely make test prints to check for fitment on your printer.
Update: I printed some in PLA and the fit is pretty good/close enough so give it a try.
I printed with 5 bottom and top layers and 5 walls for mostly solid prints since they are structural.
CAUTION: if you make your shelves too high it gets kinda spindly and wobbly. Physics!