IK iLoud Micro sideways desktop speaker stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand for laying the iLoud micro speaker on its side so that the speakers are aimed at you
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a speaker stand to enable you to lay down your iLoud Micro speakers on their side on your desk
Because of the shape of the side of the speaker, there needs to be two legs of the stand with differing shapes to make sure the speaker sits level. Print both of these legs, along with the connector and then insert the connector through the holes. You can glue them in to make them more permanent.
You will need to swap the legs around to make the stand for the other speaker as its shape will be mirrored when you lay it down.
Print at your usual settings for your favourite filament.