Nitehawk-36 + Orbiter 2.5 Mount w/ Spring Steel Slot (for Stealthchanger)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified version of Tooks' EBB36 mount that fits the Nitehawk-36 and its cable.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Remixed Tooks' mount with longer board standoffs and a slightly wider cable holder to better suit the cable included with the Nitehawk-36 toolboard. The connector didn't quite line up correctly when using this board/cable combination with the original. Due to the longer standoffs, you'll want to use M3x14 screws for mounting the board. Installation is otherwise the same as the original.
Big thanks to Tooks for including the STEP file with his original upload so I could import it into FreeCAD and do this mod! I've included the FreeCAD source as well as an exported STEP with my changes.