Gridfinity Baseplate for Küpper Tool Chest Drawers (449 × 446 mm) – 10 × 10, Dovetail Joints

A Gridfinity baseplate for Küpper tool chest drawers with an inside size of 449 × 446 mm. 10 × 10 cells of 42 mm, centred, with a solid border that fills the drawer: nothing slides, so no glue, magnets or clips are needed.

Features

• 100 cells, standard 42 mm Gridfinity pitch

• Solid border on all four sides, 0.5 mm clearance to each drawer wall

• Light profile, 4.65 mm tall with an open bottom: the drawer floor acts as the base

• Eight dovetails in the border join the six parts into one frame and keep every cell aligned (0.2 mm clearance in the sockets)

• Drop each part in from above, no tools

Print settings

• PETG or PLA, 0.2 mm layers, no supports

• One part per plate, each fits a 250 × 220 mm bed (Core One, MK4)

• Print all six parts: A1, A2, B1, B2, C1, C2

• Shown in green PETG

Sizes

• Layout 2 × (3 | 4 | 3) cells

• A1 230 × 144.5 mm, A2 224 × 144.5 mm

• B1 and B2 224 × 174 mm

• C1 230 × 138.5 mm, C2 224 × 138.5 mm

Measure your drawer first: the 449 mm side takes the two 224 mm parts. Turned 90°, the plate is 3 mm too wide.

Designed with AI assistance (parametric Python script).

En français

Socle Gridfinity pour les tiroirs de servante Küpper de 449 × 446 mm intérieur : 10 × 10 cases de 42 mm, centrées, avec une bordure pleine qui comble le tiroir (jeu de 0,5 mm par côté). Rien ne glisse, donc ni colle, ni aimants, ni attaches. Profil léger de 4,65 mm sans fond. Six pièces assemblées par huit queues d'aronde, une par plateau de 250 × 220 mm. PETG ou PLA, couches de 0,2 mm, sans support. Mesurez votre tiroir : le côté de 449 mm reçoit les deux pièces de 224 mm.