Flashforge Creator Pro Super Duper Spool Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Edit: Sep-19-2016: changed the design to metric. This is a super duper hanger for the Flashforge Creator Pro and…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 468
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Edit: Sep-19-2016: changed the design to metric.
This is a super duper hanger for the Flashforge Creator Pro and similar printers. This design has a few advantage
- Bearings based, virtually zero friction.
- Easy to mount and remove the spool. No screwing required.
- Easy to install and remove holder from the printer (e.g. in tight places)
- Fits all common spool form factor and spool holes, including Hatchbox spool with 1" hole.
Printing: print in the orientation of the provided STL file. This orientation will provide the max strength. I printed with ABS, 4 bottom/side/top layers, 0.2mm layers with 0.4mm nozzle, 20% infill and support material from the printing bed to that large round bump.
Materials: M6*90 screw (e.g. https://www.amazon.com/gp/product/B0143ACXD4), 4 X 626 bearings (I prefer the plastic/glass type, search ebay for '626 Plastic Nylon POM Ball Bearings', they turn smoothly, open don't require lubrication, don't rust, and light weight), and an M6 hex nut.
Assembly: debar the spacers and other holes (use a debarring tool such as Shaviv or a large drill bit) insert the bolt into the base, inserts the spacers and bearings insert the end piece and the nut and tighten everything.
Verifying your assembly:
- Make sure that all the bearings turn freely. The spacers are designed with chamfer at their ends to make sure the touch only the center part of the bearings.
- Make sure the end piece is well tighten and that it is pointing up. If it doesn't point up, release it, release, turn the bolt in the base a third of a turn or so and tighten again.
Print Settings
Printer:
Flash Forge Creator Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Notes:
Make sure to print in the orientation of the provided STL. This will provide the best strength and filament fibers orientation. The big oval bump require support, the rest doesn't. Make sure not to have support at the bottom of the spacers to have cleaner interfaces with the bearings.
Category: 3D Printer Parts