CoralBoard Cases & Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CoralBoard Cases & Mounts, a number of ways to mount your CoralBoard
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
CoralBoardBox_for_Stand.3mf |
|---|
Plate 1 |
Box for the Stand |
Plate 2 |
Slot covers |
Plate 3 |
Stand in portrait mode |
Plate 4 |
Stand in landscape mode |
CoralBoardBox_for_DoveTail_Mount.3mf |
|---|
Plate 1 |
Box with dovetail, prints with supports |
Plate 2 |
Slot covers |
Plate 3 |
VESA compatible, 100x100, 75x75, 50x50 |
IKEA Skådis compatible |
or use wood screws |
Plate 4 |
VESA compatible 75x72, 50x50 |
IKEA Skådis compatible |
or use wood screws |
CoralBoardLids.3mf |
|---|
Plate 1 |
Neutral lid |
Plate 2 |
Text Coral Board, landscape |
Plate 3 |
Text Coral Board, portrait |
Plate 4 |
Bubbles (say cheese... or Schweiz) |
Plate 5 |
Hexagons |
Plate 6 |
Voronoi |
Plate 7 |
Bars |
SKADIS_MountSticks.3mf |
|---|
Plate 1 |
Mount sticks for Skådis, 1.7 mm |
seemes to be the best choice |
Plate 2 |
Mount sticks for Skådis, 1.6 mm |
Probably a bit loose |
Plate 3 |
Mount sticks for Skådis, 1.8 mm |
Maybe too tight |
Slot-covers |
|---|
 |
Slot-covers for cords can be made this way, will make a STEP-file of it later ... |
When printing desktop stands |
|---|
 |
Disclaimer |
|---|
Since I don't have the actual board, there may be small adjustments needed, a width here or a height there that needs to be adjusted slightly. |