Bombardier Badge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My version of the Bombardier Badge issued by the US Army Air Force from 1918 to 1948. I made some small changes,…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My version of the Bombardier Badge issued by the US Army Air Force from 1918 to 1948. I made some small changes, notably the circle in the middle is larger so I could add some lettering (the lettering is not included in the uploaded version).
The badge has a hole through the back for attaching to the cap with a piece of .032" safety wire or similar, although that didn't work out well for me and I'll glue some velcro to it.
Print Settings
Printer Brand:
Creality
Printer:
LD-001
Resolution:
.010mm
Notes:
Printed on my Halot-one at .010mm, the best possible resolution. The examples in the photo are painted, but it would be better if they were printed with a metallic resin. Or maybe dyed rather than painted.
Designed with OnShape.com
https://cad.onshape.com/documents/e7437387e38d12e7d801ab80/w/4a543f399d2047abf97c909d/e/491198cb810fce1ba17c0bbc or search Public documents for "Bombardier Badge".
The organic wings part took a ridiculously long time.
You could probably load this into OpenSCAD and make the lettering interactive.
Category: Coins & Badges