CoralCase v1.0 - VESA, DIN and 10"rack compatible

Strong, easily printable case for Synaptics Coralboard SL with magnetic cover and every mounting solution your homelab needs. All parts fit 250mm bed.

Why should you use CoralCase?

1. If you want easily printable case with access to the electronics just by pulling the top. I don't believe in printed clips that are not couple use only so i used magnets and ferritic screws as "clip". Infinite durability.

2. If you want something good looking on your desk for development or professionally looking in your electrical cabinet.

3. If you want to use custom hardware as tophat. Just mod the available CAD to your specific tophat/usecase.

Mounting options

• Everything with 51mm hole spacing and m3 threads

• DIN clip - https://www.printables.com/model/537942-din-rail-clip-heat-insert-version

• Workbench stand - available soon

• VESA mount - made to be used with 1 of 3 types of pins

• 1U 10inch rack mount - made to be used with 1 of 3 types of pins, fits two CoralCase units

Hardware needed

• M3x12mm SHCS - 4pcs - DO NOT USE STAINLESS 

• 5x3mm magnets - 4pcs

• Some superglue to glue in the magnets

• M3x10mm BHCS - 2pcs - for hanging pins

• M3x6mm BHCS - 2pcs - for DIN clip

Recommended print parameters

• Minimum filament: PLA

• Recommended filament: PETG

• First layer height: 0.2mm

• Layer height: 0.2mm

• Perimeters: 2-3

• Bottom/top layers: 4-5

• Infill: 15%

• Brim: no

• Supports: no

Assembly

• Look at the exploded view picture

• Screw 4 bolts through middle part, SBC and bottom. The threads are plastic, so you’ll need to apply a little force the first time. Alternatively, you can cut the threads with a tap before inserting the screws. Don't forget to insert button inserts and light pipe

• Glue in 4 magnets to the printed top, make sure you orient the magnets with the correct polarity

• Attach the top to the case

All files are pre-oriented and use build in supports. If you want to print the top multicolor, set color change before 3rd layer.