DEXP DGS Furious Wireless Mouse Charging Dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom charging dock station for DEXP DGS Furious wireless mouse. Easy to print without supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 1
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Charging Dock for DEXP DGS Furious Wireless Mouse
A custom-designed charging dock for the DEXP DGS Furious wireless mouse. The base features a minimalist aesthetic with rounded edges and is engineered using a Top-Down modeling approach. No supports are needed for printing, as all internal walls run straight down to the bottom. The rear wall includes a 12mm U-shaped cutout for a Type-C cable. The recessed lid includes 5mm cylindrical pins (legs) that rest on the floor of the base for maximum structural rigidity.
The oval magnetic charging chip fits into the center of the lid (with a +0.2mm clearance) and can be secured with double-sided tape or a drop of glue.
Included files:
• The-Case.stl — main dock base.
• Cover.stl — top lid with the chip slot.
• for-Remixes.step — full solid body model for your modifications.
• chip-reference.step — reference model of the oval mouse chip geometry.
Recommended 3D Print Settings (OrcaSlicer / Cura):
• Layer height: 0.2 mm
• Perimeters (Walls): 3
• Top / Bottom layers: 4 top / 3 bottom
• Infill: 7% Gyroid
• Supports: None (all internal features are self-supporting)
• Infill expansion: 0.5 mm (for the base) / 0.13 mm (for the lid)
• Printing speeds: Outer walls 80 mm/s, Infill 100 mm/s, First layer 20-40 mm/s.
• Temperatures: 220°C Nozzle / 60°C Bed
Note: Depending on your printer's Z-Seam alignment, you might need to slightly sand down the inside corners of the main base with a needle file or sandpaper to ensure the recessed lid seats fully flush.