2018-2026 Jeep Wrangler/Gladiator Jeep Duck Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Provides a nice surface to attach your ducks to the dash using sticky tak or two sided tape.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I say this is for 2018-2026 Wranglers and Gladiators, but I designed this for my 2022 Rubicon. I'm assuming that it fits the other years and models because most of the accessories on Amazon say they are compatible for those years and models. Included in the files is a folder with a test for each file only .5 mm thick. You can print them quickly and test the fit if you want to make sure.
It is a modular design. This allows you to make it as long as you want to on the dash. I use a ball of the blue green sticky tak to keep them from rolling around, but it wouldn't stick to my dash, so I designed this. It gives a flat surface to mount the ducks.
If you don't have a lot of ducks yet, maybe you print the parts for one side. As you get more you can print the parts for the other side. Then you could add the center pieces between the two, if you want, when you need more room.
There are several versions of the files in their own folders in the Files section. You only really need to download the folder of the option you choose. There is also a folder with all the test files if you want to check the fit first. Below is the description for each folder to help you decide which version you want.
Versions
Complete Set (Speaker to Speaker)--This gives the maximum space for ducks. It basically covers the whole dash from side to side. You will have ducks sitting in front of both speakers and in front of the trays on the dash. If you need regular access to the trays, this is not a good option.
Complete Set (Speaker to Speaker With Phone Holder)--I designed a phone holder that hooks onto the inside edge of the tray. This set will go from in front of the speakers from one side to the other, but will leave a gap for the phone holder. If you need regular access to the trays, this is not a good option.
Between Speakers (No Phone Holder)--This will not have plates in front of the speakers, but will have plates in front of the dash tray. If you need regular access to the trays, this is not a good option.
Between Speakers (With Phone Holder)-- I designed a phone holder that hooks onto the inside edge of the tray. This will not have plates in front of the speakers, but will have plates in front of the dash tray next to the phone holder. If you need regular access to the trays, this is not a good option.
Left and Right of Tray --This version has the option for a plate in front of the speakers or not. There will not be a plate in front of the dash trays. If you need regular access to the trays, this is a good option.
Test Files--All the files for all the versions are here. They are .5mm thick, so they will print fast. The note under each file tells which version you would use them with.
Note about the phone holder versions: I place my phone holder at the left edge of the screen. That seemed to be the best position so it didn't block any of the buttons on the screen. Consequently, the pieces that accomodate the gap for the versions for the phone holder are designed to those measurements (see pictures). If you prefer the phone holder anywhere else, you can't use the file "RightSideLeftEndExtPhoneHolder.stl". That part fills the 190mm gap from the "RightSideLeftEnd" piece to the right side of the phone holder. The same holds true if you use any other phone holder that uses the tray in some way.
To Install:
I used two-sided tape to mount the plates.
The little ball of Sticky Tak really works to secure the ducks. See the picture of my Jeep on its side and the ducks still on the dash!
Also seen in the pictures:
1. 2018-2026* Jeep Wrangler/Gladiator Vertical Phone Holder Up to 18.6 mm Thick
2. My iPhone case (My collection of iPhone cases)
3. Star Wars Aurebesh "Jeep" Window Sign
Also Available: 2007-2017? Jeep Wrangler Duck Mount Shelf
A shelf for older Wranglers that elevates the ducks and keeps the defrost vents open.
Please post a comment or Make and tell what year Wrangler you make this for so I can update the description.