Omniwall Clip System v1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple clip system for attaching containers to Omniwall or similar
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple clip system. You print the clips flat and then design containers with slots that interact with the clips. I'm still testing this concept myself, but I figured I would release it into the wild and see if anyone has issues with it.
I have included both step and f3d files for custom adjustments. The defaults might be a tiny bit loose depending on your wall and printer so feel free to adjust the variables in the f3d for the clip thickness with the fact the Omniwall spaces are about 3mm wide in mind. My clip in the test photos is 2.8mm thick.
There is also an 'extension' parameter that will create more room for the object to be hung on the clips. I have made it 2mm here and the thickness of the test piece is 3mm.
When designing attachments the slots should be approximately 3.2mmx55mm spaced 22.4mm as measured from the inside edge. I have included the sketch for the test piece I am using here. I suggest tweaking the numbers gently to get the fit you desire for both clips and attachments.
There will almost certainly be limitations when attaching larger containers to these clips but I have created one test box found here as an example of what can work