Coralboard VESA mount for Waveshare LCD display panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a Waveshare display to any 100x100 VESA mount with the Coralboard securely attached
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Coralboard is compatible with the Waveshare DSI LCD displays, which have mounting holes for a Raspberry Pi. This doesn't have the same mount pattern as the Coralboard. I designed this using the STEP file for the 7" DSI display but the 13.3" display looks to have the same bolt pattern, though the cables are in a different place. (Waveshare don't provide a STEP for the 13.3" panel)
This simple adapter plate fits to the back of the panel using the four M2.5 bolts that a Raspberry Pi would normally attach with. Then the Coralboard can attach with four M3 bolts going in to M3 heat set brass inserts. All connectors are accessible (since it is mounted behind a display, and probably on a VESA mount, no need for extra protection).
The DSI cable connectors are aligned for the 7" display , so that it is a straight run from the display connector through the cut in the adapter plate to the connector on the bottom of the Coralboard. The display power is also accessible. It would be easiest to connect these cables before attaching to the VESA mount.
The VESA mount is 100x100mm, using M4 brass inserts.
This is a single print requiring no supports. Four M3 and four M4 heat-set inserts are required.