Traxxas Shock Spring Preload Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an 8mm tall spring preload spacer, designed for any traxxas vehicle with shocks that use preload spacers on…
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 355
- Wydruki
- 1
- Wyświetlenia
- 953
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is an 8mm tall spring preload spacer, designed for any traxxas vehicle with shocks that use preload spacers on the springs. These snap over the shock cylinder, to increase the preload. Very simple to scale to various thicknesses. This one is 8mm, the same size as the stock large clip. I suggest printing a couple at 8mm, and a couple of 50% scale on the Z axis for 4mm spacers.
Print them with 100% infill, and they should hold up reasonably well. I printed mine with PLA, and they feel almost the same as the stock ones. PETG or ABS would obviously be stronger.
Print Settings
Printer:
Tevo Tarantula
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
100%
Category: R/C Vehicles