1 / 1
Mercedes direct injectior puller and plugs for gas engines — zdjęcie 1

Mercedes direct injectior puller and plugs for gas engines

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

puller and plug for the common metal body injectors

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The two files attached are for the sleeve to go over the injector puller and a plug that can be used in the holes

The plug is set up to use and m6 heat set inset, the upper bracket is there if you wan to do valve springs on an installed head you can bolt in the plugs to pressurize the clyinders

The tool I use is this one

The sleeve does work fine in PLA but If possible printing it out of pa-gf or pps/ppa the more rigid the filament the better!