SR20 Front Main Seal Installation Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool used to install the front main seal on a Nissan SR20 Use the crank pulley bolt to pull the seal into place.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Tool used to install the front main seal on a Nissan SR20
Use the crank pulley bolt to pull the seal into place.
Works best with the woodruff key in the crank so the seal doesn't rotate as the seal goes in.
There is a stop so the seal goes 1.5mm past being flush with the housing as my oil pump has a chamfer and i thought that would be the best place for the seal. If you don't want the seal in as far just don't pull the seal all the way on to the stop.
I printed 15% infill, PLA. Works good.