1 / 2
Seasonal Stanley Cup snap on rings w SCAD — zdjęcie 1
1 / 2

Seasonal Stanley Cup snap on rings w SCAD

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I have a 30oz and thought that customizing it be fun. First time with OpenSCAD. AI checked my scad code and helped a bit

Ocena
0 / 5
Polubienia
3
Pobrania
1
Wydruki
2
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Stanley Quencher 30 oz Seasonal Rings: Drips, Ooze, Spider Web, Vampire Lips, Jack

Snap-on seasonal rings for the Stanley Quencher H2.0 30 oz. Each ring sits just under the lid threads, grips the cup with a snug friction fit and is held by a small clip over the handle. No glue, no tools, and it comes off whenever you like.

Designs

  • Drips: a wavy slime band with blobby drips. Single color.

  • Ooze: hand-drawn ooze fingers and beads. Single color.

  • Spider Web: two drawn webs, one on each side, each with a spider on the ring. Prints as one piece, or as two parts for two colors.

  • Vampire Lips: red lips with white fangs on each side. Always printed as two parts (see below).

  • Jack: three Jack Skellington faces with black eye and nose plugs. Prints as the ring plus plugs. Not yet test-printed (see below).

Multicolour without an AMS

You don’t need an AMS or any color changes. Color versions are separate parts that press together:

  • Lips: red lips and white teeth. The teeth press in from the cup side and snap into place. Tested.

  • Spider Web: ring and web in color 1, spiders in color 2.

  • Jack: ring in color 1, black plugs in colour 2. The plugs press in from the cup side. A second plate with a snugger fit (jack_plugs_print_snug) is included. Try the standard one first.

Supports

  • Drips and Ooze: no supports needed.

  • Spider Web: designed to print without supports. *tested

  • Vampire Lips: needs supports, mainly under the lower lip.

  • Jack: needs supports on the ring. The plugs are flat-backed and print without supports.

What I print with

  • Printer: Anycubic Kobra 3

  • Material: PETG-CF, 0.6 mm nozzle, 0.2 mm layers

  • Wall: 2.4 mm (four 0.6 mm perimeters)

  • Orientation: ring top on the bed (the files are exported that way, or tick flip_for_print in the SCAD)

Other materials and nozzles should work. If it’s too tight or too loose, change fit in the SCAD (default 0.25 mm per side).

Fit

  • Press the ring on from the top with the lid off.

  • Two handle clips are included: short (a small rounded plate, no legs, the default) and long (a longer hood with side legs that stops the ring turning). Choose with clip_style.

Customizing (OpenSCAD)

The parametric .scad file has a simple customizer: pick a skin, tweak the drip count and seed, choose which parts to export, and set the clip style. For Lips and Jack, keep all the included STL files in the same folder as the .scad. I recommend OpenSCAD 2024 or newer with the Manifold backend (Preferences > Features), because those two designs are large meshes.

Test status (please read)

  • Tested and fitted on a 30 oz: Drips, Ooze, Spider Web, Lips.

  • Not yet test-printed: the Jack design (ring and plugs), the drips_falling and drips_bubbles variants, and the 20 oz and 40 oz sizes. The 20 and 40 oz dimensions are placeholders from retailer specs, not measurements, and their ring height is 8 mm, the same as the 30 oz. Use the measured overrides in the SCAD to adjust them for your cup. Please post your results.

  • Jack was checked on the computer only, for fit against the 30 oz cup and for the plug clearances.

Tagi