SSUPD Meshlicious Fan Holder 92mm with better Airflow
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modded the fan holder for the SSUPD Meshlicious from chaosmage. I didn’t like that the cut out for the fan was…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 213
- Wydruki
- 1
- Wyświetlenia
- 1857
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I modded the fan holder for the SSUPD Meshlicious from chaosmage. I didn’t like that the cut out for the fan was blocking some airflow and also added some ramps to assist the stability of the part.
Fits great and im still able to route the EPS cables over it and close the top panel of the case.
Just print it with 0.2 layer height and enough walls and bottom and top layers.
Print Settings
Printer:
Ender 3 Switchwire Mod
Rafts:
No
Supports:
No
Resolution:
200
Infill:
25
Filament:
Filamentum PETG
Category: Electronics