Parametric Hollow Punch Set Case (OpenSCAD) – AI-Assisted Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AI-assisted remix of Ravenwreck’s punch case: 10 punches, plus an OpenSCAD file for any punch set.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
⚠ AI-assisted model: The OpenSCAD file in this remix was written by Claude (Anthropic’s AI) at my direction. I reviewed and printed the results, but the code itself is AI-generated. The original design is entirely @Ravenwreck’s — go give their model a like.
A case for hollow punch sets (leather, gasket and hole punches). It’s a remix of Ravenwreck’s Case for hole punch set, which held 9 punches. Mine has 10 (1–10 mm), and the included OpenSCAD file can generate a case for your own set.
What’s the same as the original
The snap latch, the slide-over lid, the wall thicknesses and the “big ones in the back, small ones in the gaps” layout are copied from Ravenwreck’s design. When you enter the original pocket sizes, the script recreates the original case almost exactly.
What’s new
Your own punch set: enter your punch diameters and lengths as comma-separated lists, and the case is drawn around them.
Adjustable fit: choose Tight, Medium or Loose (0.15 / 0.25 / 0.40 mm per side) or type a custom clearance.
Even punch height: each pocket depth is set from the punch’s length, so all punches stick up the same amount. The lid is sized to match.
Labels: size numbers are engraved on the sides of the case, and the lid text is editable.
My punch set (included STLs, Medium fit)
https://www.amazon.com/dp/B0DZ68GYJ1 (non-affiliate)
Size | Diameter (mm) | Length (mm) |
|---|---|---|
1 mm | 3.95 | 79.79 |
2 mm | 5.18 | 81.33 |
3 mm | 6.23 | 80.86 |
4 mm | 7.16 | 83.11 |
5 mm | 8.28 | 83.98 |
6 mm | 9.18 | 85.50 |
7 mm | 10.35 | 86.82 |
8 mm | 11.28 | 86.35 |
9 mm | 12.19 | 87.84 |
10 mm | 13.19 | 88.51 |
If your set measures differently, use the .scad file rather than the STLs. Measure the widest part of each punch with calipers.
How to customize
Download the .scad file and open it in OpenSCAD (free).
Open the Customizer panel.
Enter your punch diameters, lengths and labels, and pick a fit.
Set “part” to Case or Lid, then render (F6) and export STL.
Printing
Case: print upright, open end up.
Lid: print upside down, top on the bed (the Lid output is already oriented this way).
No supports needed.
Tip: before printing the full 72 mm case, slice off just the top 10–15 mm and print that to test the fit.