1 / 3
88-89 Z31 300ZX Tension Rod Bushing — zdjęcie 1
1 / 3

88-89 Z31 300ZX Tension Rod Bushing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replacement Tension Rod Bushing for the 88-89 Z31 300ZX.

Ocena
0 / 5
Polubienia
4
Pobrania
26
Wydruki
0
Wyświetlenia
428
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replacement Tension Rod Bushing for the 88-89 Z31 300ZX. The 88-89 Z31's are different than other years and it's much harder/more expensive to source bushings. This is based off of my measurements of a poly replacement bushing that I ordered.

Stock Bushing center rod insert has an ID of 14mm and an OD of 23.5mm approximately. Included are 2 files, one with a center hole diameter of 22.25 (same as the replacement bushing) and one with a center hole diameter of 23.5 (same as the OD of the stock bushing center rod if you're reusing it).

Print in TPU, check your dimensions you need before printing and compare it with the files, Solidworks files included if you need to make a modification to the design, print as solid as possible. 

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

No

Filament: Generic TPU

 

 

Category: Automotive

Tagi