PS5 Slim Digital Edition Wall Mount – Mirrored
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mirrored version of the PS5 Slim Digital Edition wall mount, so you can hang the console the other way around.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mirrored remix of the PS5 Slim Digital Edition Wall Mount by setCREATE (link to original). All credit for the design goes to the original author.
The original mount hangs the console in one direction only. This version is mirrored, so you can hang the PS5 the other way around, for example when the cable or the wall layout asks for the opposite side.
Changes
- Model mirrored,
Print settings (same as the original)
- Layer height: as you wish
- Perimeters: at least 2 mm (x4 for 0.6 mm nozzle, x5 for 0.4 mm nozzle)
- Infill: at least 35% cubic
- Support overhang angle: 61 degrees or more if your printer can handle it
- Print direction: wider part facing the print bed
Installation
1. Print the mount and the washers.
2. Mark the holes with the part or the drilling guide, then drill.
3. Place the washers. This prevents the screws from splitting the layers.
4. Mount it with suitable plugs and screws (holes are 5 mm).
5. Pull out the small cap on the bottom of the PS5 to reveal the M3 screw hole.
6. Place the PS5 on the mount and secure it with an M3 x 35 mm screw.
Note: because the mount is mirrored, the ports and power button end up on the other side compared to the original. Check this before you drill.
License: CC BY-NC-SA, same as the original.