PHIL - a cube puzzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fit the pieces together inside a 4x4x4 space. Hard puzzle, easy print.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my second burr puzzle. The solution requires at least 26 separate steps, and does not contain any rotational shortcuts (at least none that I've found yet). In my opinion this is more difficult than my first puzzle, LUCY.
Note - the completed solution is not a full cube, you win when all three pieces slide together to fit inside a 4x4x4 unit space.
Printing
material: literally anything
brim: no
supports: no
infill: 15% is fine
layer height: I use 0.25mm, anything smaller is also fine
Assembly
Snap the parts together to make the pieces (see pictures)
Use glue if you want, I find the friction fit works fine
I've called the pieces red, blue, and green, but of course use whatever colors you like - or a single color to make it just a little harder :)
Solving
The proper solution includes only moves in X, Y, and Z directions, without diagonals or rotations
Thanks
Huge thanks to the Printable Puzzle Project @PrintablePuzzleProje for their awesome OpenSCAD library!!