Philips Evnia 34M2C6500 Monitor Retention Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reworked Retention Clip which does not pop out of the retention clip hole
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
My new monitor arrived with a retention clip which would pop out of its hole, so that the VESA Mount or the Stand was able to slide out of the monitor Socket, until the spring caught on the edge of the hole. To fix this, I designed a new clip with a slightly different geometry, featuring a small protrusion which prevents it from popping out of the hole. I kept the recess for the original spring and it works fine with the spring mounted, but for me it was also stiff enough to work without the spring. I printed it in PETG with 2 perimeters (0.6 mm Nozzle, so ~1.2 mm Wall thickness) and 20% Infill.