Stackable Battery Beer Crate AA & AAA – No Supports, Low Material, Fast Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable battery beer crates for 12 AA or 20 AAA. Both sizes stack together. No supports, fast and light print.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Finally, I did my own battery storage in the style of a classic German beer crate (Bierkasten). There are many great designs already (CADGuys or baua1365s).
But I wanted for a long time to design my own version from scratch in FreeCAD with three goals:
Stackable—crates lock onto each other, and AA and AAA crates share the same footprint, so you can mix them in one stack.
No supports—all openings are designed for bridging and overhang-friendly angles.
As little material as possible—open walls and thin dividers: about 20 g and 1.5 h per crate.
Versions
- AA crate: 12 batteries (3 × 4)
- AAA crate: 20 batteries (4 × 5)
- Outer size (both): 52.7 × 68.9 × 55 mm
Print settings
Material: PLA or PETG
Layer height: Testprints are with 0.2 mm
Perimeters: 2
Supports: none
Infill: 15 %
Brim: Outer brim recommended
Print upright, as oriented in the file
Print weight&time:
AA-12 batteries 19.8 g 1 h 31 min (MK4S)
AAA-20 batteries 23.5 g 1 h 50 min (MK4S)
Tip: Use different colors for charged / empty batteries or for AA / AAA – a stack of colorful crates looks just like the real thing.
Ready-to-print 3MF files are included. I'd love to see your makes—please post a photo!