Heewing T2 Cruza Nose for Walkansil VTX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heewing T2 Cruza Nose for Walkansil VTX
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Heewing T2 Cruza Nose for Walksnail VTX – 9g Pan Servo, Pitot Tube Mount & VTX Switch
A replacement nose for the Heewing T2 Cruza, made for a Walksnail VTX and a pan-controlled camera.
Features
Mount for a 9g servo to pan the camera
4 mm mount for a pitot tube
Small compartment for an ON/OFF switch for the VTX
Designed around the Walksnail VTX (20mmx20mm)
Hardware needed
2x M3 heat-set inserts for the mounting part (see the picture for where to place them)
1x 9g servo (pan)
1x ON/OFF switch for the VTX
(https://de.aliexpress.com/item/1005003033472272.html?spm=a2g0o.order_list.order_list_main.15.7b7918024uJlgX&gatewayAdapt=glo2deu)Pitot tube, 4 mm (optional)
Print settings (what I used)
Nozzle: 0.6 mm
Layer height: 0.3 mm
Walls: 1 wall line
Infill: 5 % gyroid
Modifiers: I added modifiers in the slicer to switch to 2 wall lines around the heat insert positions, so the inserts have enough material to hold. Aswell as made sure that the mounting plate where the VTX sits on is solid!
Supports: depending on your slicer and orientation; check the preview
Feedback and photos of your makes are welcome!
