Glass scraper (for SB 45 blades)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for the SB 45 glass scraper from Tetra, where the tube is too flexible, too short and the angle of the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
A replacement for the SB 45 glass scraper from Tetra, where the tube is too flexible, too short and the angle of the blade not optimal for my needs.
With the new one I'm able to clean my tight overflow chamber.
You'll need the original blade of course (Tetra sells 3 blades for 3-4 €), an aluminium tube (1m long, 10mm diameter outside, 1mm wall thickness) and 2-3 M4 screws (4-6mm long, V2A/V4A or plastic).
The tube can be additional fixed by a M4 screw, but it fits very well without a screw in my case.
I've used PETG, but PLA should work, too.
Print Settings
Printer:
Prusa i3 MK3S
Rafts:
No
Supports:
No
Infill:
30%
Category: Pets