Round mini Bases with magnet holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
25mm, 30mm, 32mm and 40mm with holder for 10x2mm magnets.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
Bases are 3.7mm high and the diameter is the diameter of the widest bottom part. Prints without support, files are oriented the correct way.
Printed with 0.4mm nozzle and 0.2mm resolution. Magnets are press fit but you can also secure with a drop of CA glue. This is intended for 10x2mm magnets, depending where you order them from, the tolerances are a bit different, I designed the mount to fit the widest that I found - as mentioned, CA glue can be used to keep them in place.
Let me know if you need other sizes or prefer other magnet sizes.