1 / 3
Miniature snap case - satisfying closure!
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small snap case with low profile hinge design and satisfying closure
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Magnetic closure snap case with low profile hinge. Created initially as a way to carry kneadable art putty rubber.
Requires 4x magnets, 5x2 mm. Insert a pause in the slicer on each piece at the top of the hole allocated for magnets, and place the magnets in during the pause.
Use a straightened paper clip for the hinge. Requires some force to get the paperclip in, however this is worthwhile to get a snug fit and smooth hinge movement.
