1 / 4
MGB Heater and Defrost Knob for 1971-1976 — zdjęcie 1
1 / 4

MGB Heater and Defrost Knob for 1971-1976

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement knobs for MGB heater and defrost controlls.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
18
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

MGB Heater and Defrost Knob for 1971-1976

One of the knobs on my MGB stripped out and would no longer turn the control. I designed this knob based off of the original and it mounts and releases in exactly the same way.

Printing:

I don't use supports, it bridges just fine, but it's your call.

Use at least PETG if not ASA as this will get plenty of sun exposure.

Use at least 4 walls. I found that 30% infill makes it approximately the same weight as the original  (if you care)

I used adaptive layer height to get the curves to look nice..

Throw in a color change for the top if you want to mimic the silver dot on the original. I haven't found a way to transfer it over to the replacment.

Tagi