The American University in Cairo (AUC) Branded Fidgets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two Fidgets with the theme of the American University in Cairo, one is a spinner, and the other is multi-part fidget
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — NoDerivatives
Two Fidgets with the theme of the American University in Cairo, one is a spinner, and the other is multi-part fidget.
Features & Tolerance:
Designed to print in place.
The design is based on an 0.15-0.20mm tolerance.
Print Settings:
Layer Height: 0.2mm (or 0.16mm if you want cleaner curves)
Infill: 15% - 20%
Filament: PLA or PETG works great
Orientation: The Word Fidget have to be printed upside down for it to be pip.
Usage & Assembly:
The model is a mechanical fidget that can be fitted into a key chain.
The model presents two distinct fidgets, a print-in-place spinner fidget and a multi-part fidget.
The Fidget in the letter A is a Bi-arch lens that rotates inside a triangle.
The Fidget in the letter U is a satisfying gear with a spring.
The Fidget in the letter C is just a slider.
If your printer couldn't print the spinner mechanism, you may switch to a ball bearing system and use the AUC Logo Spinner Fidget.step file
Also please note that if you will print in PETG, it is recommended to print the springs in PLA to have more flexibility, or reduce their thickness.
STEP File & License: I uploaded both the STL and the editable .STEP file in the files section so you can open it up in Fusion 360, SolidWorks, or FreeCAD to modify or resize the hole. This project is open source under CC BY-SA 4.0, so feel free to remix it!