Wedge Bot Chassis (8kg and 15kg)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wedge bot chassis made in fusion 360 with spike :)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Wedge Bot Chassis (8kg and 15kg)
What is this :
its a sumo bot chassis made for the 8kg and 15kg weight classes. Where it includes 4 ingenium p219 775 drives motor and powered by 60d esc. Their i have left enough space in the middle to fit 6s lipo battery, esc so the weight stays low and centered.
How i made this :
I designed everything in fusion 360. first and foremost, i put ingenium drive motor with colson wheel in base plate and then i draw wholes in the back for ln screw which attached to the p219 motor after this i put battery on it so i could see how much space they really take.
then i sketched the chassis outline around the parts and kept checking dimensions so both sides stay equal.
similarly, i make all the whole things wedge and spike to attached in the body chassis i have make the whole for m12 screw so that we can easily fit the wedge and spike to the body with m12 screw.
Assembly guide :
parts you need :
4psc p219 775 ingenium drive motor
4psc Colson wheel
60d esc
6s 5200 mah battery
silicon wire
m12 knot and bolt
m3 for motor mount
cnc laser cutting chassis
Note : this chassis is not 3d printed we have to make this by cnc laser cutting or by wielding
After making chassis you can fit all the electronics and their is one top plate where you can simply take out by removing knot cause their is 4 bolt in the chassis.