1 / 2
Halloween - Bat Garland - Easy to print! — zdjęcie 1
1 / 2

Halloween - Bat Garland - Easy to print!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A flock of little bats that hook straight onto a piece of string. Print a plate, thread them on, hang it over a doorway!

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

What's in the box

Three bats, so the garland doesn't look like a copy-paste job:

File

Bat

Size

Bat_Big.stl

big bat, wings spread

85 × 29 mm

Bat_WingsUp.stl

smaller bat, wings raised mid-flap

62 × 27 mm

Bat_Hanging.stl

sleepy bat hanging upside down by its feet

26 × 43 mm

Bat_Plate_10.stl

ready-made plate: 4 big, 4 wings-up, 2 hanging

175 × 160 mm

The plate fits any bed from 180 × 180 mm up. On a bigger bed, just add more bats in the slicer.

How they hang

Each flying bat has two little J-shaped hooks along the top of its wings, and the hanging bat has one between its feet. Push the string down into the slot, slide it sideways into the end of the hook, and that's it. The bat's own weight keeps the string at the end of the hook, so it doesn't fall off when the garland moves. To take one off, slide the string back and lift it out.

The hooks fit anything up to about 2 mm thick: cotton twine, baker's twine, thin ribbon, fishing line, even a strand of fairy lights with a thin cable. Thicker cord won't go in.

For the flying bats, both hooks point towards the body, so the bat follows the string and doesn't spin around.

Printing

  • Flat on the bed, as they are. No supports, no brim.

  • 2.4 mm thick: 0.2 mm layers give 12 layers. 100 % infill or just let the walls fill it, it hardly matters at this size.

  • Black PLA is the classic. Glow-in-the-dark filament is the party trick, and a matte black looks great against a lit window.

  • Want them two-tone? Pause at layer 11 and swap to orange or purple for the last two layers. The bats are the same on both sides apart from that, so you can turn the colourful side to the front.

Ideas

  • A string of fairy lights behind the bats makes the eyes glow.

  • No string? A single hanging bat sits nicely on a thin nail, a wire, or a twig in a vase. Anything up to 2 mm thick fits the hook between its feet.

  • They make great little take-home gifts for party guests.

Happy haunting! 🦇

Tagi