DIY Mechanical Keyboard Switch Buttons (1–10)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizable holder for 1–10 KS-9 keyboard switches, with printable keycaps and no soldering at the switch pins.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Standard Digital File License
Add the feel of a mechanical keyboard to your own projects. This 3D-printed holder lets you use KS-9 mechanical keyboard switches as wired push buttons in DIY electronics, control panels, and printed enclosures.
Customize your setup
Choose 1 to 10 switches in a single row using the Customize option. Printable keycaps are included.
No soldering needed
Crimp the JST-XH terminals onto your wires, then insert them into the built-in slots. The slots hold the terminals in position to make contact with the switch pins, keeping the wiring neat and secure.
Removable and reusable
The switches and terminals can be removed for repairs, changes, or reuse in another project. This makes the holder useful for prototypes and projects that may change over time.
Included files
Ready-made holders for 1–5 switches.
A Bambu Studio 3MF project with five plates and matching keycaps.
A separate keycap STL.
An OpenSCAD customizer for 1–10 switches.
Hardware needed
KS-9 mechanical keyboard switches.
JST-XH crimp terminals and wires.
M3 × 8 mm screws.
M3 threaded inserts, 4 mm long.
DXF cutout outlines are included for all 10 sizes, with 0.15 mm clearance per side and Ø4.1 mm mounting holes.