Mugen Seiki MSB1 Tower guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a tower guard for my MSB1
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I designed a shock tower guard for my Mugen MSB1 because the kit doesn't come with one, and the TLR option is a bit too bulky in my opinion. It fits the rear tower as well!
It allows the shock cap to move completely freely and relies on a 3-point contact for maximum force absorption.
Printed in PETG (0.12 mm layer height, 100% infill, and 3-4 outer walls).
Orientation: on the thicker side(like on the picture (looks better) or back (easier to print but not as pretty).
You can use a smooth PEI build plate for a nicer finish.
You need a M3x25mm screw to use this tower guard!
I'm keeping this project open-source to help out as many drivers as possible! Feel free to test it, or grab the attached .f3d file and improve the design yourself.
Let me know what you think 💚🤙
Update: I added a Version for the inner shock mounting hole.