DF65 RC transmitter bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RC transmitter phone attachment bracket This bracket is for the original transmitter of the Dragon Force 65 RC…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
RC transmitter phone attachment bracket
This bracket is for the original transmitter of theDragon Force 65 RC sailboat.
It has a hanging eye for hands free hanging from your neck.
It has a camera attachment, fitting a 1/4" 20 UNC bolt.
For the bracket, the locking bolt and nut are size 8-32.
The OpenSCAD file is included, if you have another bolt and nut available, you can change the parameters.
Print Settings
Printer:
Cubicon Single Plus
Rafts:
No
Supports:
Yes
Resolution:
?
Infill:
25%
Filament:
? PLA
Red
Notes:
I printed this on the Cubicon Single Plus at our Public Library; with standard settings for the printing.
I could only print with PLA, thus will see how long it lasts outside.
Worst case it's easy to reprint it.
Happy sailing.
Post-Printing
After assembling of the bracket, I added pieces of innertube to give more grip and avoid sliding of the bracket.
How I Designed This
I designed this on OpenSCAD as I had clear dimensions and wanted to have as little tolerances as possible to get a good fit.
Category: R/C Vehicles