Clip, Freezer, Frigidaire Freezer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a clip to hold the glass shelf inside a Frigidaire 20CUFT Garage upright freezer.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Public Domain
This was designed specifically for the Frigidaire 20.0 CUFT Garage upright freezer (Model FFUE2024AW). A friend of mine asked me to make one since he couldn't find one online anywhere. He gave me an existing clip (which was extruded plastic and crudely cut). I used FreeCAD to model it. The photo was from him showing the clip in place. While it appears sloppy, the walls of the freezer unit are horizontally uneven from shelf support to adjacent shelf supports, and the white plastic part is used to take up the variable widths in their freezer design. After he approved the test fit on one part, I printed five more for him.
I used Polymaker white PETG on my PRUSA MK4S with standard slicer settings.