Halloween pumpkin ( LiDAR scan of a real musquee de provence ) with a lid that can be opened with a hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of a real, scanned pumpkin (LiDAR scan). Edited for a Halloween look and lid.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Model is not an KI Model.
I scanned a real musquee de provence pumpkin from my garden with my 3D scanner to create this cute Halloween pumpkin.
I then edited it in Blender to give it the Halloween look and add a lid.
For the lid, you can use the STL „Pin for hinge“ or you can use a 25mm M3 screw and an M3 nut.
If you use the STL „Pin for hinge“, please print it very slowly.
Please manually reduce your printer's print speed to 40%.
You can simply press the end cap onto the pin. If it doesn't stay on, just use a drop of superglue.
If you can't push the screw or the printed pin through the opening because there's still some support material in the way, you can simply use a power drill with a 3mm drill bit to quickly clear the area.
I painted the pumpkin stem with revell email color.
Alternatively, you can download the natural pumpkin scan (without the face and without the lid).
I've already set several sizes of this: 10%, 25%, 50%, and 100%. If you'd like a different size, download the 100% version and scale it to your desired size. I was able to print 10-100% of the full version without the face without any problems.
You shouldn't scale the Halloween pumpkin with the face, otherwise you'll have problems with the hinge.
Besides the large Halloween pumpkin, I also decorated a few smaller ones without faces.
I would recommend using PLA or PETG for printing.
I printed with a 0.4mm nozzle and a layer height of 0.2mm.
For the Halloween pumpkin, I set 4 perimeters; for the full pumpkin, 3 perimeters and 10% infill are sufficient.
I enabled tree support (organic support) for the Halloween pumpkin.
I hope you enjoy the cool pumpkin.
Let me know with a like if you like it. I always like to see your makes :-)
If you like, check out my other Halloween designs too.