Blocky Buddies Christmas Ornaments - 6 Chibi Characters

Six original Christmas ornaments from Popyca Studio: our chunky Blocky Buddies Hero, Knight, Wizard, Robot, Astronaut and Ninja standing on a festive red or green medallion with a string loop. All characters are our own designs (no licensed or fan-art characters).

Files

• 6 x STL - single colour, for any printer

• 6 x multi-colour 3MF - 4 colours per ornament (3 figure colours plus the medallion) for AMS / multi-material

• starter-set-6-ornaments.3mf - all six ornaments on one plate, sliced for a Bambu Lab X1C (about 2 h 11 min, about 69 g PLA). Re-slice with one click for P1S / A1 or other printers

Size and design

• 66 mm round medallion (2.4 mm disc with a 4 mm raised rim), figure about 52 mm tall, about 73 x 66 x 14-18 mm in total

• Flat back lies on the print bed, string loop with a 4.2 mm hole at the top

Print settings (as sliced)

• Slicer-verified in Bambu Studio on X1C, P1S and A1, 0.4 mm nozzle

• PLA, layer height 0.20 mm (Standard), 2 walls, 15 % infill

• Supports: OFF - none needed. Brim: none needed (flat back)

• Single colour: about 20 to 24 min and 10 to 12.5 g per ornament when printed alone. Print one in red or green and paint or leave plain

• Multi-colour on an X1C: about 1 h 40 min to 2 h 24 min per ornament, 100 to 155 filament changes, 20 to 26 g including the prime tower

Honest notes

• This is the first batch of this set. Every file was checked in the slicer with supports off and no warnings, but the pictures here are renders, not photos of printed ornaments. Please let us know how your print goes in the comments, and post a make if you print one.

• Smallest details (face pixels) are about 1.2 mm, so use a 0.4 mm nozzle at 0.20 mm layers or finer.

More Blocky characters and keychains from Popyca Studio are coming. Licence: Creative Commons Attribution-NonCommercial - print them, gift them, remix them, credit Popyca Studio, no selling.