1 / 1
Anderson Powerpole Pigtail Connector Holder Body and Panel Adapters — zdjęcie 1

Anderson Powerpole Pigtail Connector Holder Body and Panel Adapters

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Alternate for silicone boots

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Holds pair of 15A - 45A Powerpole connectors and allows you to add after assembly is made so you can replace a boot if damaged.

Be aware that you can't use these in stacked (more than 1 pair connector bodies) as these block the adjacent ports. The "Quad" port version in this link isn't compatible with these, so I created a new spaced "Quad-Spaced" port verision that's included below.

The body is a snap fit when used with a powerpole, but a dab of CA glue will hold it solid. Only use a dab if you ever want to get it open again.

Printed PETG 100% infill, no supports required.

Designed in vanilla AutoCAD 2027.

73 de K4ZX