Raspberry Pi 5 W/ Sunfounder Fusion Hat+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All-In-One Raspberry Pi 5 Enclosure designed specifically for use W/ Sunfounder Fusion Hat+ & the included battery.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello! Thank you for taking the time to view my model. This is an easy print, easy assemble simple case for you to conduct bench top experiments and maybe robot prototypes. There are ports for all GPIO and others, a nice chassis fan (optional) 30x30mm in size, a dedicated space for the included battery and a place to route the cable. I added a spot for heat-set inserts in the base and the matching holes on the lid for screws, however, this is totally optional as well, the lid is a tight fit as is and will do fine without heatset inserts but you could technically put screws right into the plastic as well if you don't plan to disassemble/reassemble inside the case a lot or you can always print a new one for pennies....
Note about the last 2 photos uploaded in the model pictures: the hat you see on the pi in these photos is NOT the hat this case was designed for. My actual Fusion Hat+ is currently deployed in my SquazelPad cyberdeck and I didn't feel like disassembling it to put it all into the case. I can assure you the case has been test fitted properly and dimensions are accurate. Check out the SquazelPad if you havent already!