Glowing Christmas Village – 3 Houses for LED Tea Lights / Leuchtende Weihnachtshäuser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
2,45 € – 2,99 € netto (bez VAT)
Dla pliku: cottage_0.2mm_PLA_MK4S_2h14m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,72 € netto (środek widełek).
- Masa podana przez autora
- 44 g
- Czas druku podany przez autora
- 2,24 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Three cozy Christmas houses for LED tea lights – slightly irregular, like hand-made ceramics. Printed without supports.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
🏡 English below, Deutsch weiter unten 🏡
A little village full of light
Inspired by ceramic Christmas houses, I designed the big house in Blender and then two smaller ones to keep it company. The roof shingles are placed slightly crooked by a little Python script, so every row looks a bit hand-made rather than perfect.
The houses are open at the bottom. Just place one over an LED tea light, and the windows start to glow. ✨
Large Organic House: approx. 11 × 8 × 14 cm, fits two LED tea lights side by side
Medium Cottage: approx. 8 × 6 × 7 cm, fits one LED tea light
Small Cabin: approx. 7 × 6 × 8 cm, fits one LED tea light
🌲 The trees in the photos are mine too and are coming soon: [LINK]
Printing
Tip: Start with one of the two small houses. It's done in a little over two hours, and you'll see whether you like the look.
No supports needed
Layer height 0.2 mm, 3 walls, outer brim
PLA or PETG
Depending on your printer, a small brim helps and the window bars may need a little clean-up
Times and filament on my Prusa MK4S (PLA):
Small Cabin approx. 2 h 25 min / 44 g
Medium Cottage approx. 2 h 14 min / 44 g
Large House approx. 5 h 38 min / 104 g
Project files are included.
The filament makes the mood
With a lightly pigmented filament, the whole house glows softly. With a strongly pigmented one, only the windows shine. Compare the two evening photos! The house showing its back was printed in eSun Cold White: https://link.amazon/B050z7CHY (affiliate link) As an Amazon Associate I earn from qualifying purchases. 🧡
Please use LED tea lights only, never real candles.
I'd love to see your little village, so please share a make! 🎄
---
Ein kleines Dorf voller Licht
Inspiriert von Keramik-Weihnachtshäusern habe ich das große Haus in Blender gestaltet und zwei kleinere dazu, damit es nicht allein ist. Die Dachschindeln setzt ein kleines Python-Skript leicht schief, so wirkt jede Reihe ein bisschen handgemacht statt perfekt.
Die Häuser sind unten offen. Einfach über ein LED-Teelicht stellen, und die Fenster fangen an zu leuchten. ✨
Großes Haus: ca. 11 × 8 × 14 cm, passt für zwei LED-Teelichter nebeneinander
Mittleres Häuschen: ca. 8 × 6 × 7 cm, passt für ein LED-Teelicht
Kleine Hütte: ca. 7 × 6 × 8 cm, passt für ein LED-Teelicht
🌲 Die Tannen auf den Fotos sind auch von mir und folgen bald.
Tipp: Fang mit einem der beiden kleinen Häuser an. Das ist in gut zwei Stunden fertig, und du siehst, ob dir der Look gefällt.
Keine Stützen nötig
Schichthöhe 0,2 mm, 3 Wände, outer Brim empfohlen
PLA oder PETG
Je nach Drucker hilft etwas Brim, und die Fenstersprossen brauchen eventuell etwas Nacharbeit
Druckzeit und Filament auf meinem Prusa MK4S (PLA):
kleine Hütte ca. 2 h 25 min / 44 g
mittleres Häuschen ca. 2 h 14 min / 44 g
großes Haus ca. 5 h 38 min / 104 g
Die Projektdateien liegen bei.
Das Filament macht die Stimmung
Mit wenig pigmentiertem Filament leuchtet das ganze Haus sanft. Bei stark pigmentiertem scheinen nur die Fenster. Vergleiche die beiden Abendfotos! Das Haus mit der Rückseite zur Kamera ist aus eSun Cold White: https://link.amazon/B050z7CHY (Affiliate-Link) Als Amazon-Partner verdiene ich an qualifizierten Verkäufen für mehr Filament zum Testen. 🧡
Bitte nur LED-Teelichter verwenden, niemals echte Kerzen.
Ich freue mich über Fotos von deinem kleinen Dorf! 🎄
