1 / 2
Westlake Alfa Powder Flasks (and lids, and funnel) — zdjęcie 1
1 / 2

Westlake Alfa Powder Flasks (and lids, and funnel)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

STL files to print flasks with caps to hold nitro powder for the Westlake Alfa .357 revolver, and a funnel + OpenSCAD

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
8
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

If you have a Westlake Alfa then you probably use something like this already. I bought a set on eBay, and they work well, but indexing the collars to the chambers of the revolver's cylinder can be tricky.

In my improved version, the collars are extruded somewhat and tapered to form short nipples. These are much easier to index to the revolver's chambers. They also make the funnel more secure when it is used to transfer powder.

I printed mine with PETG on a Prusa MK4S. I set "0.15mm STRUCTURAL" with no supports and a 15% infill.
(Except for the funnel: 100% infill, because it only has thin walls.)

I was pleased to see that the caps seat securely on the nipples, even without magnets. For this reason, I'd say that the magnets are optional - I decided to use them for extra security. With my settings, 10 mm diameter button magnets simply press into place: I didn't have to use glue.

Two pieces of advice, both fairly obvious. (1) If you use magnets, be consistent with polarity so that your caps and pots are fully interchangeable. (2) Once you've up-ended the pot and the cylinder, give the pot a few taps to chase out all the powder.

As for the source code: if you haven't tried OpenSCAD before, do give it a try. You'll see that writing the code to make these loading accessories was pretty trivial. It is ideal for simple designs like these.

Tagi