1 / 6
Fortified Watchtower Ruin – Tabletop Terrain 28 mm / 1:56 – Created with PrintHaus — zdjęcie 1
1 / 6

Fortified Watchtower Ruin – Tabletop Terrain 28 mm / 1:56 – Created with PrintHaus

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Battle-damaged 28 mm watchtower ruin. Created with PrintHaus; free registration includes one free download.

Ocena
0 / 5
Polubienia
3
Pobrania
6
Wydruki
0
Wyświetlenia
33
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

A ruined version of the two-storey brick watchtower: a direct hit has torn away the roof and hollowed out the upper floor, leaving a roofless, battle-scarred shell for tabletop battles, skirmishes and dioramas.

How I created this model

This is the same tower as my Fortified Watchtower, created in the browser with PrintHaus, the building generator I develop, then hit with the app's Bomb Blast tool. A projectile cuts a crater through the building, walls and roof break into jagged edges, and anything that loses its support falls away. Here, the blast completely destroyed the hipped roof and wraparound balcony, exposing the upper floor and revealing the interior stairs and rooms.

The brickwork on the walls is real printed relief, modelled into the geometry rather than printed as an image. The windows have sills and glazing bars and are printed without glazing.

Printing

  • Scale 1:56 (28 mm), approx. 117 × 117 mm footprint and 100 mm high.

  • 8 push-fit pieces on 4 print-ready plates in the original 3MF: exterior walls, base plate, stairs and windows.

  • Parts are pre-oriented flat for FDM printing.

  • The colours are simply my choice of filament and can be changed.

Pairs with my intact Fortified Watchtower. Print both for a before-and-after display or a diorama in which one tower is still standing.

Created with PrintHaus

I created this model with PrintHaus. PrintHaus lets you configure buildings in your browser and export them for 3D printing. Register for free at printhaus.app and receive one free model download.

Original MakerWorld print profile

0.2 mm layer height, 2 walls, 12% infill; PLA. Estimated print time in the original MakerWorld profile: 6.6 hours. The supplied original Bambu Studio 3MF contains 4 print plates.

Tagi