Kitchen Cabinet Ventilation Grille(108mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic ventilation grille with an integrated 108mm round duct adapter. Designed specifically for kitchen cabinets
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Specifications
Fits Hole Size: 108 mm (diameter for the circular cutout in the furniture board)
Design: Square slatted front plate with a round rear connection sleeve.
Recommended Print Settings
Layer Height: 0.15 mm (recommended for smooth surface finish on the slats)
Nozzle Diameter: 0.40 mm
Infill: 15% - 20% (Grid or Gyroid)
Supports: Depending on your printer's bridging capabilities, you might need light supports inside the round tube overhang where it meets the flat plate. Printing face-down is generally recommended.
Material: PLA (for standard use) or PETG / ASA (if exposed to higher temperatures or kitchen steam).