Vallejo 17ml Printable Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed 3D printable Vallejo 17ml Cap. Some of the caps on my paint set were splitting and I didn't have any spare…
- Ocena
- 5 / 5
- Polubienia
- 106
- Pobrania
- 1070
- Wydruki
- 17
- Wyświetlenia
- 2979
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Designed 3D printable Vallejo 17ml Cap. Some of the caps on my paint set were splitting and I didn't have any spare empty bottles to reuse the caps. So, I designed this printable version to do the job.
Printing:
Printed at 0.15mm layer height using 0.40mm nozzle.
Fillament use was PLA, but you could use ABS if you want to perform additional processing with Acetone vapour smooting.
Printed using 2 wall perimeters
No supports required
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Infill:
25
Filament:
eSUN PLA+
Black
Category: Hobby