Halloween Mix Headband - Pumpkin, Bats & Ghosts (Single & Two-Color)

Halloween Mix Headband - pumpkin, bats and ghosts all on one hair band. A jack-o'-lantern in the middle, a bat on each side of it and a ghost at both ends - a whole Halloween party on one headband. This one is a little wider (about 154 mm) because the ghosts sit at the sides. Two versions are included: 1) Single color - print it in one filament. 2) Two-color outline - the same design with a 1.2 mm contour in a second color around every figure and its cut-outs (works with Bambu AMS, Prusa MMU, Creality CFS and similar systems). Highlights: pumpkin, two bats and two ghosts; thin springy 2.0 mm band with rounded tips and a small comb on the inside that helps the band stay in the hair; prints flat with no supports, one-piece print; overall size 154 x 164 x 8 mm, about 20 g of filament (single color). Print settings: 0.4 mm nozzle, 0.20 mm layers, 3 walls, 3 top/bottom layers, 15 % infill, no supports, 5 mm outer brim recommended, PETG recommended (flexible) or PLA, print flat exactly as supplied. Sizing: sized for a child's head (inner width about 118 mm, the band flexes). For a larger head scale the model uniformly, e.g. 110 %. Files: SingleColor 3MF and STL; TwoColor_Outline 3MF (two parts, assign two filaments) and the same two parts as separate STL files (part1 fill-and-band, part2 outline). Note: this model has not been test-printed yet - please slice and preview before printing. Happy Halloween!