1 / 7
Keyhole hanger marking tool
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recommend printing it on its side for the best spring it uses normal #2 pencil graphite which you can get by using a…
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 1003
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (51)Powiązane
I recommend printing it on its side for the best spring
it uses normal #2 pencil graphite which you can get by using a knife or by soaking the pencil for a few hours until the glue and wood soften enough to just peel apart.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Infill:
100%
Filament:
snapmaker pla
black
Category: Hand Tools