Cute Desert Warrior Flexi Toy, Horned Kid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cute horned desert kid with a turban and a scimitar, plus a print-in-place 5-link tail. A1 mini, 1 plate.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A little horned desert warrior with a wrapped turban, a chunky curved scimitar, huge glossy eyes and a bendy 5-link tail that prints in place.
PRINT NOTES
Size: 53 x 120 x 70 mm, scalable in the slicer
- Printer/profile: Bambu Lab A1 mini, 0.4 nozzle, 0.12 mm fine, PLA
- Supports: yes, bed-only (under the sword, horns and tail) Print time: 2h 19m Filament: 29.6 g
- Printed single color; AMS not required (paint it or swap colors in the slicer)
- The five tail links print loose in place, no assembly. Remove the supports gently around the tail and flex each link once to free it.
ABOUT THIS MODEL
Designed with AI assistance (Tripo AI) and prepared for printing by me: repaired, scaled, tail attached, sliced.
Tail mechanism: print-in-place tentacle chain adapted from Rocktopus (CC0, public domain).
The pictures are concept renders of the intended colors (cream and tan body, maroon turban, silver scimitar, tan and maroon tail). This model is sliced and checked but has not been test-printed yet; real photos will replace the renders.