Gridfinity Qidi Max4 Nozzel Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1x2x2u Nozzel Holder for 2x Qidi Max4 Nozzels
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
The models are to store 2x Qidi Max4 Nozzles in the Gridfinity System. They are in particular designed for 1x2x2U, Stackable, and wont spill your nozzle if stacked or within a case that "Closes" down on them.
So far these are the only ones I have needed. I can share .Solidcraft files if people want to alter them from scratch.
I do plan on making more pre-made ones for everyone.
I printed in PETG 0.2mm layer height, 15% standard infill, 4Wall Loops, 5Top Shell, 3Bottom Shell, Iron all Top Layers(Rectilinear), Concentric Top/Bottom Layer, No Brim, and i also edited layer 69 to print Black, Then White, then layer 70 to print White than Black (if that actually helped at all i'm unsure)