1 / 3
8 tool INDX ColorMix Color Mixing Test — zdjęcie 1
1 / 3

8 tool INDX ColorMix Color Mixing Test

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 37-sample ColorMix test for the 8-tool INDX, inspired by PrusaSlicer's virtual color mixing triangle.

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
86
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial

8 tool INDX ColorMix Color Mixing Test – 37 Samples, 205 Unique Mixes

Note: The single color web preview of the models don't show the flush embedded text. You'll have to open as project in PrusaSlicer to see it and to get all of the virtual color presets.

This model is designed to test PrusaSlicer's color mixing with the new Prusament ColorMix filaments. ColorMix uses transparent colors to create better blending of the colors. Here's their blog post on the filament and here's a help article on using the ColorMix feature.

The triangle has 37 samples showing pure colors, two-color mixes, and three-color mixes. Each sample has an ID that matches the percentage table on the back (or the separate table model).

How the Triangle Works

The triangle is designed to mimic the virtual color mixing triangle in PrusaSlicer when mixing three colors.

  • Corners: The three pure colors being mixed such as cyan, magenta, and yellow.

  • Edges: Two-color mixtures, with different ratios of the two colors.

  • Interior samples: Three-color mixtures, combining all three colors in different ratios.

Moving from a corner toward an edge or the center changes the proportions of each color. This makes it easy to compare different mixes and see how they look when printed with ColorMix filaments.

Why I made this

There are already several color mixing models out there, but I wanted one that better matches the virtual color mixing triangle in PrusaSlicer. I also wanted a physical reference I could use in the future when choosing virtual colors for my own models.

Color mixing results

The best-looking mixes tend to be two colors mixed at 50/50. These usually give the smoothest-looking results.

The less a color is used, the more noticeable its individual layers become. The colors still blend well when viewed from a distance, but up close you can see more color banding.

Three-color mixes show the most banding and may be less desirable.

I recommend using a 0.1 mm layer height for color mixing. I also use this layer height for aesthetic prints in general, as it tends to give the best-looking results. The 0.1mm layer height suffers more from overhang curling. Go really slow on overhangs (~10-20mm/s) with full fan speed to minimize this.

How many triangles do you need?

For the full range of color mixes using cyan, magenta, yellow, black, and white, 10 triangles will be needed. That's 370 samples in total, or 205 unique color combinations after accounting for the duplicates.

8-tool INDX setup

The included 3MF projects use seven of the eight available tool slots:

Tool

Filament

1

Cyan

2

Magenta

3

Yellow

4

White (Transparent ColorMix)

5

Black (Transparent ColorMix)

6

Unused

7

Black (Opaque)

8

White (Opaque)

Slots 4 and 5 are for the special transparent black and white ColorMix filaments. Slots 7 and 8 are used for the sample labels and triangle base.

You can use any colors you want in slots 7 and 8. Slot 8 will be used the most used since it prints the triangle base. Slots 7 and 8 were split out to conserve the more expensive ColorMix filament when printing multiples of these models.

Reading the sample IDs

Each sample's ID matches a row in the percentage table, which shows how much of each color is used. Each solid color corner sample will be labeled A, B, or C. Mixes are determined as ratios of A, B, and C.

For example:

ID

A

B

C

7

50

50

0

Sample #7 uses equal amounts of colors A and B, with no color C. The number printed on the sample matches the ID in the table.

Four models included

Triangle with IDs and table on the back

  • The full version, with numbered samples and the percentage table built into the back.

Triangle with IDs, no table

  • The same numbered samples without the table. Print the separate table once and reuse it with multiple triangles.

Triangle with colors only

  • No IDs or table. Uses tool 8 for the base and your choice of three mixing colors. This version is also suitable for the 4-tool INDX system.

Standalone table

  • A separate rectangular version of the percentage table. Print it once and reuse it with multiple triangles.

For example, print model 2 with model 4 if you want a separate table, or model 3 if you just want to compare colors without labels.

Thoughts on Color Mixing

After printing these samples, I think CMY mixing could benefit from dedicated red, green, and blue filaments with transparency. Red is especially weak when mixing CMY. Green and blue have decent representation so at the very least maybe a dedicated red with transparency for blending.

Tagi